Installation Preparation; Installation Warnings - Cisco ASA 5506W-X Hardware Installation Manual

Installation Preparation

This chapter prepares you to install your ASA, and contains the following sections:
•
•
•
•
•

Installation Warnings

Be sure to read the
Take note of the following warnings:
Read the installation instructions before connecting the system to the power source.
Warning
Before working on a chassis or working near power supplies, unplug the power cord on AC units; disconnect
Warning
the power at the circuit breaker on DC units.
Before working on equipment that is connected to power lines, remove jewelry (including rings, necklaces,
Warning
and watches). Metal objects will heat up when connected to power and ground and can cause serious burns
or weld the metal object to the terminals.
During this procedure, wear grounding wrist straps to avoid ESD damage to the card. Do not directly
Warning
touch the backplane with your hand or any metal tool, or you could shock yourself.
Online Only
Installation Warnings, page 23
Position the ASA, page 24
Mount and Deployment Preparation for the ASA 5506W-X, page 25
Safety Recommendations, page 25
Site Environment , page 26
Regulatory Compliance and Safety Information
Cisco ASA 5506-X, ASA 5506W-X, and ASA 5506H-X Hardware Installation Guide
2
C H A P T E R
document before installing the ASA.
23