Siemens SIMATIC NETS7-1200 Operating Instructions Manual page 67

Value
1
2
Field for the parameter area "GPRS access"
Table 5- 6 IF_CONF_APN
Parameter
Id
Length
Mode
AccesspointGPRS
AccesspointUser
AccesspointPassword
Field for the parameter area "CP identification"
Table 5- 7 IF_CONF_Login
Parameter
Id
Length
Mode
ModemName
ModemPassword
Field for the parameter area "Telecontrol server access"
This field is only used when the telecontrol server is addressed with a name that can be
resolved by DNS. If the telecontrol server is addressed with its IP address, the
"IF_CONF_TCS_IP_V4" field is used.
In STEP 7, the corresponding data is located in the "Mode" parameter area.
If there is more than one telecontrol server, use the field once per server.
CP 1242-7
Operating Instructions, 09/2011, C79000-G8976-C247-02
Meaning
Permanent validity of the configuration data
Not relevant for the CP 1242-7
Temporary validity of the configuration data, including deleting of existing permanent
configuration data
The permanent configuration data is replaced by the parameter fields of IF_CONF.
Data type Initial value
UINT 4
UINT
UINT
STRING [98]
STRING [42]
STRING [22]
Data type Initial value
UINT 5
UINT
UINT
STRING [22]
STRING [22]
5.4 Configuring the telecontrol instructions
Description
ID of the parameter field
Length of the parameter field in bytes: 174
Validity (1: permanent, 2: temporary)
APN: Name of the access point of the GSM network
provider to the Internet
APN user name
APN password
Description
ID of the parameter field
Length of the parameter field in bytes: 54
Validity (1: permanent, 2: temporary)
Access ID
The value cannot be set.
Telecontrol password (max. 20 characters)
Configuration
67