Preface; Safety Precautions; Insulation Resistance Test; Specifications - Honeywell CL30XC Service Manual

1. PREFACE

This manual is designed to provide you with important service information. Be sure to read the
safety precautions prior to servicing the unit.

1.1 Safety Precautions

1 When servicing, set the POWER of the CONTROL PANEL to OFF and unplug the power
cord.
2 Observe the original lead dress. If a short circuit is found, replace all parts which have been
overheated or damaged by the short circuit.
After servicing, make an insulation resistance test to prevent the customer‟s exposure to
3
shock hazards.

1.2 Insulation Resistance Test

1 Unplug the power cord and connect a jumper between 2 pins (black & white).
2 The grounding conductor (green or green & yellow) is to be open.
3 Measure the resistance value with an ohm meter between the jumper lead and each exposed
metallic part on the equipment at all MODES (except POWER OFF).
The value should be over 1 MΩ.
4

1.3 Specifications

MODELS
ITEMS
Power Supply
Input (W)
Running Current (A)
Fan Type
Fan Speeds
Fan Motor HP
Operation Control
Relative Humidity
Control
Air Direction Control
Timer Control
Protector
Filter
Power Cord
Water Fill System
Drain System
Water Tank Capacity
Net Weight
Outer Dimension
(W x D x H)
CL30XC
1Ø , 220-240V, 50Hz
252W
1.15A
4
Control Panel with Remote Control
Vertical Louver (Right & Left) - Auto
Horizontal Louver (Up & Down) - Manual
Fan Motor Internal Thermal Protector
Water Pump Internal Thermal Protector
Honeycomb media (427mm x 330mm x 50mm) & Carbon Filter
1.8m (3 wire with grounding)
Manual (from side panel or detachable water tank)
Detachable water tank or manual drain plug
8 US Gallon / 30 L
24.6 lbs / 11.2 kg
18.0‟‟ x 13.9‟‟ x 33.7‟‟
458 mm x 352 mm x 856 mm
3
Website: http://www.honeywellaircoolers.com
CHL30XC
2250W
10.23A
Blower
1/6
Adjustable
0.5 to 8 hours
26.8 lbs / 12.2 kg
18.0‟‟ x 13.9‟‟ x 33.7‟‟
458 mm x 352 mm x 856 mm
CONFIDENTIAL
3