How To Change Main Motor; Blower Housing; Main Motor Wiring Connection - Honeywell CL30XC Service Manual

2.4 How To Change Main Motor

Remove the rear panel follow the procedure 2.1.1.
Remove the top panel follow the procedure 2.3.1.
2.4.1

Blower Housing

Use screw driver to remove 2
galvanized screw with plate
head (ST3.5*15) and (ST3.5*10)
to remove left & right panel
and blower housing.
Use screw driver to remove 7
and 4 galvanized screw with
plate head (ST3.5*15)
(ST3.5*10) to remove left &
right panel and
housing.
2.4.2

Main Motor Wiring Connection

Main motor wiring connection refers to part 4.2 Wiring Color Description.
Use screw driver to remove
9 galvanized screw with
plate head (ST3.5*15) to
remove the blower housing.
Remove the
(below picture shown).
and Note: connection
between capacitor and the
blower motor.
13
Website: http://www.honeywellaircoolers.com
Use hex nut spanner
(S=3) to remove retainer
nut of the blower.
wiring cap Use screw
remove
is screw with plate head
(ST3.5*15)
the motor.
CONFIDENTIAL
driver to
8 galvanized
to remove