Cisco TelePresence MX700 Installation Manual page 22

Installation guide for Cisco TelePresence MX700 Single camera - Wall mount
18
Organize pre-mounted cables
Stretch out the cables in the channel on top of the monitors,
and place them as illustrated. Do not unplug any cables.
This arrangement makes the installation of the camera module
in step 20 and connecting cables in steps 19, 21 and 22 easier.
To the left of camera module
3 ×
78-100254-03A0 | 2016 JUNE | © 2016 Cisco Systems, Inc. All rights reserved.
Left
monitor
Camera cables
Loudspeaker cables
3–5 (step 22)
Right
monitor
To the right of camera module
HDMI (step 21)
Power (step 21)
5 ×
Ethernet (step 21)
On the right side of monitor
Power over Ethernet
(step 19)
HDMI (step 19)
USB, type B (step 19)
Loudspeaker cables
1–5 (step 22)
Page 22