Cisco TelePresence MX700 Installation Manual page 13

Installation guide for Cisco TelePresence MX700 Single camera - Wall mount
9
Lift and place left monitor onto lower frame
D
65 kg / 144 lb
Keep the monitor close to the wall so the
1
clamps on the rear side of the monitor
slide fully onto the top wall bracket.
Make sure that the screw with wing nut
enters the center slot on both sides.
Do not let go of the monitor before it is
securely placed on the lower frame.
78-100254-03A0 | 2016 JUNE | © 2016 Cisco Systems, Inc. All rights reserved.
Front view
Front view
Rear view
Rear view
Tighten the wing nuts
2
on both sides. They are
accessed from the sides
of the monitor.
Page 13