Cisco TelePresence MX700 Installation Manual page 12

Single camera mounted on the wall

Hide thumbs Also See for TelePresence MX700:

Installation guide for Cisco TelePresence MX700 Single camera - Wall mount

Read before you mount the monitors

The monitors are heavy

We recommend three people working together

to mount the monitors. Two people should lift the

monitor using the handles as described here. The

other person must help stabilizing the monitor and

check that the monitor enters the slots properly.

The screws with wing nut, which you can see from

the sides of the monitor, must enter the center slot

on each side of the lower frame.

Use lifting handles

To avoid trapping your fingers, use the lifting

handles at the bottom of the monitor.

Note to Step 9 and Step 11

When you lift and place the monitor onto the

wall brackets, keep the monitor close to the

wall so the clamps on the rear side of the

monitor slide fully onto the top wall bracket.

Page 12

Table of Contents