Shift Lever Trim Removal/Lnstallation - Honda Civic 2002 Service Manual

Shift Lever Trim Removal/lnstallation
NOTE:
. Take care not to scratch the dashboard and related
pa rts.
. Put on gloves to protect your hands.
1. Remove the glove box (see page 20-63).
2. Remove the shift knob.
U s i n g a r a t c h e t w r e n c h a n d a n 1 1 i n c h e x t e n s i o n
(A) wrapped with a shop towel (B), carefully insert
the extension through the glove box opening, and
push the shift lever trim (C) from under the trim to
release the clips (D) and hooks (E) of the left side.
Fastener
D>clip,
i : F
\V
Locations
2 E > H o o k , 2
.-a7
\r-
t1
u
4. Pull outthe shift levertrim (A) by hand to release
t h e r e m a i n i n g c l l p s ( 8 , C ) a n d h o o k s ( D ) , a n d
disconnect the hazard warning switch connector (El,
then remove the trim.
Fastener Locations
B >:Clip, 1 C > : C l ; p , 1
D > : H o o k , 3
,,.;w,
Install the trim in the reverse order of removal, and
note these rtems.
. Make sure the hazard warning switch connectot
is plugged in properly.
. Push the clip and hook portions into place
securely,
-
, ,
20-61