Honda Civic 2002 Service Manual page 84

7. Pull back the edge of the seat-back cover (A), and
r e l e a s e t h e c l i p s { B ) .
Pull back the edge of the seat-back cover, and pull
out the seat-back frame {A) from the seat-back pad
{ B ) , t h e n p u l l o u t t h e h e a d r e s t g u i d e ( C ) w h i l e
p i n c h i n g t h e e n d o f t h e g u i d e s , a n d r e m o v e t h e m .
9. Remove the seat-back cover (A)from the seat-back
pad (B). On right seat-back with center shoulder
belt, pass the center belt (C) through the hole in the
seat-bacl( cover.
lnstallthe cover in the reverse order of removal,
and note these items:
. To prevent wrinkles when installing a seat-back
cover, make sure the material is stretched evenly
over the pad before securing the hooks and clips
. On right seat-back: When installing the seat-back
frame to the pad, slip the center belt through the
hole in the seat-back cover and pad.
. Replace any clips you removed with new ones.
I n s t a l l t h e m w i t h c o m m e r c i a l l y a v a i l a b l e
upholstery ring pliers.
1 0 ,
20-83