Table of Contents
Advertisement
How to Set up HMR3000 Demo Unit
1) Connect the interface cable between the HMR3000 and COM port of a PC. Select the line voltage input
(110/220 V), turn the voltage selector to 9 V dc mark, and plug in the adapter to an electrical outlet.
2) Install PC Demo Interface software on the PC by running Setup.exe from CD Rom. In Windows 95 or NT click
start, then Run and browse CD Rom to find Setup.exe. (Version 2.01 or higher)
3) Double click on PC Demo Interface icon.
Select the correct COM port and 19200 baud rate (COM port is usually COM1).
Click the musical note button
Go to Serial Output tab and change the message rate on HPR sentence to 825.
Click on the display button
Note: You should have received PC Demo Interface Ver. 2.01 or higher. If you have an older version please update to
the latest version. Please call Honeywell customer services at 612-954-2888 if you need this newer version of software
Computer Requirements
Minimum:
Recommended:
Note: The Graphical output of the HMR3000 on PC Demo software may become sluggish if the PC has slow graphic
capability or if other applications are running in the background.
PC 486/33MHz
Windows 3.1, Windows 95 or NT Operating System
VGA
2 Mb disk space (more for log file and captured data)
RS-232 serial port
P5/120MHz
Windows 3.1, Windows 95 or NT Operating System
SVGA 1024 x 768
Microsoft Excel (5.0 or greater) for capture and export of data (if desired)
900240 Rev. B
3/01
page ii
Advertisement
Table of Contents
