Pulling Up The Bobbin Thread; Changing Sewing Directions - AEG 225/7 LCD Instruction Book

PULLING UP THE BOBBIN THREAD

CHANGING SEWING DIRECTIONS

1. Lower needle down into fabric and raise
presser foot, turn the fabric around the
needle to change direction as desired.
12
1. Hold the upper thread with left hand, turn
the hand wheel slowly towards you until the
needle goes down and up. Stop the hand
wheel when the take up lever is at its highest
position. Easily pull up the upper thread, the
lower thread will be brought up in a loop.
2. Pull out both threads under the presser foot
to the rear of the machine.
3. Place fabric under pressure foot from the
front, lower pressure foot.
4. Start to sew.
2. Lower the presser foot and start sewing.