Table of Contents
Advertisement
Syntax
show interfaces description [gigabitethernet unit/slot/port | port-channel
port-channel-number | tengigabitethernet unit/slot/port |
fortygigabitethernet unit/slot/port]
Default Configuration
This command has no default configuration.
Command Mode
User Exec mode, Global Configuration mode and all Configuration
submodes
User Guidelines
This command has no user guidelines.
Example
The following example displays the description for all interfaces.
console>show interfaces description
Port
Description
----
------------------------------------------------
Gi1/0/1 Port that should be used for management only
Gi2/0/1
Gi2/0/2
Port
Description
----- ----------------------------------------------------------------------
Po1
show interfaces detail
Use the show interfaces detail command to display detailed status and
configuration of the specified interface.
Syntax
show interfaces detail interface-id
•
interface-id—
An Ethernet interface identifier or port channel identifier.
Layer 2 Switching Commands
404
Advertisement
Table of Contents
