Table of Contents
Advertisement
User Guidelines
Refer to IEEE 802.1ag for an explanation of maintenance association levels.
Typically, this value is assigned by the top level network service provider.
Example
console(config-if-Gi1/0/1)# ethernet cfm mip level 7
ping ethernet cfm
Use the ping ethernet cfm command to generate a loopback message (LBM)
from the configured MEP.
Syntax
ping ethernet cfm {mac mac-addr| remote-mpid 1-8191} {domain domain
name | level 0-7} vlan vlan-id mpid 1-8191 [count 1-255]
•
level—Maintenance association level
•
mac-addr—
be verified. Either MEP ID or the MAC address option can be used.
•
remote-mpid—
destination MEP ID.
•
domain—
Name of the maintenance domain (an alphanumeric string of up to
43 characters in length).
•
vlan-id—
A VLAN associated with the maintenance domain. Range: 1-4093.
•
mpid—
The MEP ID from which the loopback message needs to be
transmitted.
•
count—
The number of LBMs to be transmitted. The default number is 1.
Default Configuration
By default, this command will transmit one loopback message with a time-out
of five seconds.
Command Mode
Privileged Exec
The destination MAC address for which the connectivity needs to
The MEP ID for which connectivity is to be verified; i.e. the
Layer 2 Switching Commands
431
Advertisement
Table of Contents
