Table of Contents
Advertisement
User Guidelines
This command has no user guidelines.
Example
(console)#show ipv6 dhcp snooping
DHCP snooping is Disabled
DHCP snooping source MAC verification is enabled
DHCP snooping is enabled on the following VLANs:
11 - 30, 40
Interface
Trusted
---------
--------
Gi1/0/1
Yes
Gi1/0/2
No
Gi1/0/3
No
Gi1/0/4
No
Gi1/0/6
No
show ipv6 dhcp snooping binding
Use the show ipv6 dhcp snooping binding command to display the IPv6
DHCP snooping configuration
Syntax
show ipv6 dhcp snooping binding [{static|dynamic}] [interface interface-id
| port-channel port-channel-number] [vlan vlan-id]
•
static—Only show static entries.
•
dynamic—Only show dynamic entries.
•
interface-id—Limit the display to entries associated with physical
interface-id.
•
vlan-id—Limit the display to entries associated with VLAN vlan-id.
•
port-channel-number—Limit the display to entries associated with the
identified port channel.
Default Configuration
This command has no default configuration.
Log Invalid Pkts
----------------
No
Yes
Yes
No
No
Layer 2 Switching Commands
364
Advertisement
Table of Contents
