NETGEAR EVA9000 User Manual page 21

Table 3. Rear Panel Description (continued)
Item
S/PDIF coaxial
(audio) port
S-Video port
Component video
ports
Composite video
and stereo audio
port
S/PDIF optical
audio port
USB v2.0 port
10/100 Mbps
Ethernet port with
LEDs
Reset button
Fan
Power connector
On/Off switch
Wireless antennas
(internal)
Welcome to the Digital Entertainer Elite
Compatible Equipment and Cables
Sony/Phillips Digital Interface (S/PDIF) cable, also called
standard RCA type coaxial cable (not included).
S-Video cable (included) that works with most televisions
in the United States.
Component video cable (not included).
Composite video and stereo audio cables (included),
which can be used with most televisions in the United
States.
Sony/Phillips Digital Interface (S/PDIF) for optical cable
(not included).
USB mass storage devices such as hard drives, media
players (including Windows- or Mac-formatted Apple
iPods), and flash memory devices.
Cat 5 network cable (included in the package) that you
can use with this port to connect the Digital Entertainer
Elite to a wired local area network (LAN).
Reset the Digital Entertainer Elite to its default factory
settings. To reset, press and hold the button down while
the unit is powering up. The Power LED blinks to
acknowledge the reset request.
Fan for cooling the optional internal hard drive. The fan
operates only when a hard drive is installed.
IEC Digital Entertainer Elite power cord (included).
Turns the Digital Entertainer Elite on or off.
The internal wireless antennas support IEEE 802.11n,
IEEE 802.11g, and IEEE 802.11b. Keep the internal
wireless antennas clear of metallic obstructions.
7