NETGEAR EVA9000 User Manual page 103

Power and Hard Drive Tools
The Power and Hard Drive screen includes additional settings for hard
drive and power features.
To access these options, press
functions > Advanced > Power and hard drive.
• Fan override. Specifies when the hard drive cooling fan runs. The
default is auto. This option is available only if a hard drive is
installed.
• Standby: Select the number of minutes or hours that should pass
before the device enters standby mode. The default is Never.
• Power Off: Select the number of minutes or hours that should pass
before the device is powered off. The default is Never.
• Remote power key: Select if the power button should put the
device in Standby or Power Off the unit. The default is Standby.
• File Sharing. Enable File Sharing to allow drag and drop of media
files. See
on page 51
File Sharing is enabled the system will not enter Power Off mode
automatically. This option is available only if a hard drive is
installed.
• Video buffering. Use video buffering to improve the performance
of video playback, especially over a wireless connection. Select All
Videos for best performance with a wireless connection. This
option is available only if a hard drive is installed.
• Disk buffer size. Select the amount of disk space used for the video
buffer. Use the up and down arrow buttons to increase or decrease
the buffer size setting. This option is available only if a hard drive is
installed.
Custom Setup and Supervisor Functions
"Drag and Drop Media Files to the Internal Disk Drive"
for more information. The default is Disabled. When
Home, and select More > Supervisor
89