Updating The Firmware; Playing Media - NETGEAR EVA9000 User Manual

Updating the Firmware

To update the firmware on your Digital Entertainer Elite, press
Home, and select More > Supervisor functions > Update.
• To check for firmware updates for the Digital Entertainer Elite on
the NETGEAR website, select Update from the Internet, and follow
the onscreen prompts.
• If the firmware file is located on a USB storage device, connect the
device to the USB port of your Digital Entertainer Elite, and select
Specify a location. Uncompress the file .zip file, if necessary. The
.img firmware file must be on the top level (root) of the device. If
more than one file is on the device, you are prompted to select a
file.
• When the update is complete, the Digital Entertainer Elite restarts.

Playing Media

If the Digital Entertainer Elite cannot play media or music, check to see
if the file is protected. Windows Media Connect is required for
100
Be sure that power to your Digital Entertainer Elite unit
is not interrupted during the firmware update process.
Failure to observe this precaution can permanently
damage the unit.
Following a firmware update, you need to reload your
media library into the Digital Entertainer Elite from the
backup location.
Maintenance and Troubleshooting