Troubleshooting A Wireless Network Connection - NETGEAR EVA9000 User Manual

• Make sure that the Ethernet cable connections are secure at the
router and at the hub or workstation.
• Make sure that power is turned on to the connected hub or
workstation.
• Make sure that you are using a standard Ethernet cable and not a
cross-connect cable.

Troubleshooting a Wireless Network Connection

If you did not connect an Ethernet (LAN) cable, the Digital Entertainer
Elite scans for wireless networks. If it does not find your network, check
the following items:
• The Digital Entertainer Elite cannot connect to the wireless network
while it is connected to the Ethernet network. Disconnect your
Ethernet cable.
• Move the Digital Entertainer Elite closer to the wireless access
point or router. See
• If there is more than one network in your area, then you must know
the network name. The network name is also called the service set
identifier (SSID).
• If your access point or router does not broadcast its SSID, then it is
a hidden network, and the Digital Entertainer Elite cannot detect it.
–
–
For detailed information about wireless networks, see "Wireless
Networking Basics" listed in
Maintenance and Troubleshooting
"Wireless Range and Interference" on page
The SSID, and passwords keys are case-sensitive. For example,
NETGEAR is not the same as Netgear.
You must manually enter your wireless settings as described in
"Setting Up Network Shares" on page
"Related Documents."
91.
110.
109