Port Forwarding/Port Triggering - NETGEAR WNR612 User Manual

Netgear WNR612 Wireless Router User Manual
Field
Wireless Repeater
Disable Wireless Clients
Association
Repeater IP Address
Basic Station MAC
Address
Wireless Basic Station
Repeater MAC Address
1/2/3/4
After setting, click Apply to save the settings.

6.7.3 Port Forwarding/Port Triggering

Click Port Forwarding/Port Triggering on the left pane of the page to display the
following page.
Description
switches to the Wireless Settings page, where you
can change the channel.
In this mode, the router serves as a repeater to
communicate with the central base station.
If it is selected, clients cannot access the LAN.
Enter the IP address of the repeater. It must be in the
same network segment as the IP address of the
central base station.
Enter the physical address of the central base station.
In this mode, the router serves as the central base
station to communicate with repeaters. You can add
up to four repeaters. The central base station forwards
the data of communication between repeaters to the
destination repeaters.
configured accordingly.
Enter the physical address of the repeater.
74
Repeaters should be