NETGEAR WNR612 User Manual page 58

Netgear WNR612 Wireless Router User Manual
Click Add and the Block Services Setup page appears:
The following table describes parameters in this page:
Field
Select a service type from the drop-down list. If your desired
type is not in the list, select User defined. Then, you need to
Service Type select the protocol, enter the service name, and specify the
port range. For services that exist in the drop-down list, the
corresponding information is already preset.
Indicate the protocol that is used at the service ports. You can
Protocol
select TCP/UDP, TCP, or UDP.
The first port to which an application sends a connection
request. All relevant ports can be open only after connection is
Starting Port
established at this starting port. Otherwise, other relevant ports
are not open.
Ending Port Set the end port of the service port range.
Service
Enter the service name.
Type/User
Description
55