NETGEAR WNR612 User Manual page 106

Netgear WNR612 Wireless Router User Manual
Because the router is beyond the wireless coverage.
(1) Place the router near the customer premises equipment (CPE).
(2) Try modifying the channel setting.
Because of authentication problems.
(1) Use a computer of wired connection to connect the router.
(2) Check the network security settings.
(3) Try hard reset on the router.
Because the router cannot be detected.
(1) Try hard reset on the router and test again.
(2) Check the settings of the wireless network.
(3) Check the settings of SSID and encryption.
Failure to connect to the Internet through the wireless router
(1) Place the router to the wireless area where the CPE can connect.
(2) Check whether the wireless network card connects to the correct AP (base
station).
(3) Check whether the wireless channel accords with the channel specified in your
country or region.
(4) Check the encryption settings.
(5) Check whether your ADSL cable is connected to the correct network interfaces.
(6) Replace with a new network cable to connect to the router.
Failure to access the Internet
(1) Check whether the status of indicators on the ADSL modem and the wireless
router is normal.
(2) Check whether the WAN indicator is on. If the WAN indicator is off, check
whether the cable connected to the WAN interface is loose.
(3) When the Link indicator keeps on but does not blink, the router is connected to
the Internet.
(4) Reboot your computer.
(5) Set the AP again.
(6) Check whether the WAN indicator is on.
(7) Check the encryption settings of the wireless network.
103