Cisco Catalyst 4500 Series Software Configuration Manual page 1898

Enabling and Configuring Ethernet OAM
Switch# show ethernet oam status int gi1/2
GigabitEthernet1/2
General
-------
Admin state:
Mode:
PDU max rate:
PDU min rate:
Link timeout:
High threshold action: error disable interface
Link fault action:
Dying gasp action:
Critical event action: no action
Link Monitoring
---------------
Status: supported (on)
Symbol Period Error
Window:
Low threshold:
High threshold:
Frame Error
Window:
Low threshold:
High threshold:
Frame Period Error
Window:
Low threshold:
High threshold:
Frame Seconds Error
Window:
Low threshold:
High threshold:
Receive-Frame CRC Error
Window:
Low threshold:
High threshold:
Transmit-Frame CRC Error: Not Supported
Catalyst 4500 Series Switch, Cisco IOS Software Configuration Guide - Cisco IOS XE 3.9.xE and IOS 15.2(5)Ex
75-48
enabled
active
10 packets per second
1 packet per 1 second
5 seconds
no action
no action
100 x 1048576 symbols
5 error symbol(s)
5000 error symbol(s)
10 x 100 milliseconds
8 error frame(s)
8000 error frame(s)
1000 x 10000 frames
9 error frame(s)
9000 error frame(s)
100 x 100 milliseconds
1 error second(s)
none
10 x 100 milliseconds
10 error frame(s)
1000 error frame(s)
Chapter 75 Configuring Ethernet OAM and CFM