How To Use Touch 10 - Cisco SX10 Quick Set Administrator's Manual

Cisco TelePresence SX10 Quick Set

Introduction

How to use Touch 10

The Touch 10 user interface and its use are described in
full detail in the User guide for the video system.
D15330.06 SX10 Administrator Guide CE9.1, JUNE 2017.
Configuration Peripherals
Indicates whether or not the
Proximity feature is available.
Tap the settings icon (cogwheel)
to open the System Information
window, which also gives access
to the Settings menu and a
Restart button. You can also
activate and deactivate Call
forwarding, Standby, Proximity
and Do not disturb modes.
Tap Call to make a
call, and to invoke the
Favorites, Directory and
Recents contact lists.
Tap Messages to invoke
the voice mail system, if
available.
Press and hold the
left side of the Volume
button to decrease the
loudspeaker volume and
the right side to increase
the volume.
Maintenance
www.cisco.com — Copyright © 2017 Cisco Systems, Inc. All rights reserved.
133
Administrator Guide
System settings Appendices Appendices
Tap ? to contact Help desk or access
other facility services, if available.
Entry point for in-room controls, if available
(your system may have a different entry icon).
Tap the Camera icon to activate
self-view and camera control.
Tap Share
sharing content and to
conduct presentations.
Entry point for in-room
controls, if available
(your system may have
different text and icon).
Press the
button to mute and unmute
microphones.
Time of day.
to start
Microphone