Field
Change Request
Change Accept
Change Reject
Related commands
reset zone statistics
display zone status
Use display zone status to display the zoning configuration and status.
Syntax
display zone status [ vsan vsan-id ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
vsan vsan-id: Specifies a VSAN by its ID in the range of 1 to 3839. If you do not specify a VSAN, this
command displays the zoning configuration and status in all VSANs.
Usage guidelines
Only FCF and FCF-NPV switches support this command.
The zoning configuration and status include:
•
Zone mode.
Default zone policy.
•
Distribution and merge type (not displayed in enhanced zoning mode).
•
•
Zone database information (numbers of existing zone sets, zones, and zone aliases).
Zoning status.
•
Examples
# Display the zoning configuration and status in all VSANs.
<Sysname> display zone status
VSAN 1:
Mode: basic
Default zone: deny
Distribute: active only
Hard-zoning: enabled
Full zoning database:
Zonesets: 10, Zones: 20, Zone-aliases: 0
Status: merging
VSAN 2:
Description
Number of Distribution Request packets.
Number of Distribution Accept packets.
Number of Distribution Reject packets.
77