Interface Vfc - HP 6127XLG Blade Series Command Reference Manual

Parameters
e: Specifies the E mode.
f: Specifies the F mode.
np: Specifies the NP mode.
Usage guidelines
An FCF switch supports E and F modes. An NPV switch supports F and NP modes. An FCF-NPV switch
supports E, F, and NP modes.
On an FCF-NPV switch, if the mode of a VFC interface is not supported by a VSAN of the interface, the
mode does not take effect in the VSAN.
Examples
# Set the mode of interface VFC 1 to E.
<Sysname> system-view
[Sysname] interface vfc 1
[Sysname-Vfc1] fc mode e

interface vfc

Use interface vfc to create a VFC interface and enter its view. If the VFC interface already exists, this
commands leads you to VFC interface view directly.
Use undo interface vfc to delete a VFC interface.
Syntax
interface vfc interface-number
undo interface vfc interface-number
Default
No VFC interface exists.
Views
System view
Predefined user roles
network-admin
Parameters
interface-number: Specifies a number for the VFC interface, in the range of 1 to 1024.
Usage guidelines
A VFC interface is a logical interface manually created on the FCF switch to simulate the functionality of
a physical FC interface.
Examples
# Create interface VFC 1 and enter its view.
<Sysname> system-view
[Sysname] interface vfc 1
[Sysname-Vfc1]
11