Zone-Alias Clone; Zone-Alias Name - HP 6127XLG Blade Series Command Reference Manual

# Rename zone z1 as z2.
[Sysname-vsan1] zone rename z1 z2
Related commands
display zone
•
zone name
•

zone-alias clone

Use zone-alias clone to create a zone alias by copying an existing zone alias.
Syntax
zone-alias clone src-name dest-name
Views
VSAN view
Predefined user roles
network-admin
Parameters
src-name: Specifies the name of the source zone alias to be copied, a case-sensitive string of 1 to 64
characters. A source zone alias name can contain English letters (uppercase and lowercase), numbers,
and special characters dollar sign ($), minus sign (-), caret (^), and underscore (_), and it must start with
an English letter.
dest-name: Specifies the name of the destination zone alias, a case-sensitive string of 1 to 64 characters.
A destination zone alias name can contain English letters (uppercase and lowercase), numbers, and
special characters dollar sign ($), minus sign (-), caret (^), and underscore (_), and it must start with an
English letter.
Usage guidelines
Only FCF switches and VSANs operating in FCF mode support this command.
Examples
# Create zone alias za1.
<Sysname> system-view
[Sysname] vsan 1
[Sysname-vsan1] zone-alias name za1
[Sysname-vsan1-zone-alias-za1] quit
# Create zone alias za2 by copying zone alias za1.
[Sysname-vsan1] zone-alias clone za1 za2
Related commands
display zone-alias
•

zone-alias name

•
zone-alias name
Use zone-alias name to create a zone alias and enter its view. If the zone alias has been created, the
command leads you to the zone alias view directly.
95