Fcoe Fka-Adv-Period - HP 6127XLG Blade Series Command Reference Manual

Usage guidelines
On FCF or NPV switches, you can set an FC-MAP value only in system view. On FCF-NPV switches, you
can set an FC-MAP value only in VLAN view.
An FC-MAP value identifies an FCoE network. Switches in the same FCoE network must have the same
FC-MAP value.
After an FC-MAP value is set, VFC interfaces perform a FIP renegotiation.
Examples
# Set the FC-MAP value to 0x0EFCFF on an FCF or NPV switch.
<Sysname> system-view
[Sysname] fcoe fcmap 0efcff
Changing the FC-MAP will flap all VFC interfaces. Continue? [Y/N]: y
# Set the FC-MAP value to 0x0EFCFF in VLAN 2 on an FCF-NPV switch.
<Sysname> system-view
[Sysname] vlan 2
[Sysname-vlan2] fcoe fcmap 0efcff
Changing the FC-MAP will flap all VFC interfaces in current VLAN. Continue? [Y/N]:y

fcoe fka-adv-period

Use fcoe fka-adv-period to set an FKA advertisement interval.
Use undo fcoe fka-adv-period to restore the default.
Syntax
fcoe fka-adv-period fka-adv-period
undo fcoe fka-adv-period
Default
The FKA advertisement interval is 8 seconds.
Views
System view, VLAN view
Predefined user roles
network-admin
Parameters
fka-adv-period: Specifies an FKA advertisement interval in the range of 4 to 600 seconds.
Usage guidelines
On FCF or NPV switches, you can set an FKA advertisement interval value only in system view. On
FCF-NPV switches, you can set an FKA advertisement interval value only in VLAN view.
The FKA advertisement interval determines the length of time the switch takes to detect the disconnection
of a virtual link.
The FKA advertisement interval defines the interval for a switch to send unsolicited Discovery
Advertisements to its peer switches or ENodes.
A switch uses the following process to maintain the virtual link established with a peer switch:
17