Quick Set C20—Cable Configuration - Cisco C20 Administrator's Manual

Cisco TelePresence System Quick Set C20 / C20 Plus and Profiles using C20
Contents Introduction
Quick Set C20—Cable
configuration
The illustration shows you the basic setup when connecting
the monitor, PC,
PrecisionHD 1080p 4X
loudspeakers (if applicable), LAN and line voltage to the Codec
C20.
NOTE: The early shipments of the Quick Set C20 came with
an interim version of the PrecisionHD 1080p 4X camera (the
PrecisionHD 1080p 4X* camera). For cable configurations of the
interim PrecisionHD 1080p 4X* camera, see next page.
CAUTION: In order to be able to use the system for video calls,
all orange colored sockets must be connected.
The codec must be switched off and disconnected from
!
the line voltage whenever connecting or disconnecting
other equipment.
D14637.04 Profile C20 and Quick Set C20 Administrator Guide TC4.0, November 2010.
Copyright © 2010 Cisco Systems, Inc. All rights reserved.
Web interface
camera, microphone,
Advanced configuration Password protection
66
Administrator guide
Appendices Appendices Contact us
HDMI HDMI
www.cisco.com