Cisco C20 Administrator's Manual page 49

Cisco TelePresence System Quick Set C20 / C20 Plus and Profiles using C20
Contents Introduction
The Video settings, continued...
Video Monitors
Set the monitor layout mode.
ADMIN
Requires user role:
<Single/Dual/DualPresentationOnly>
Value space:
Single: The same layout is shown on all monitors.
Dual: The layout is distributed on two monitors.
DualPresentationOnly: All participants in the call will be shown on the first monitr, while the
presentation (if any) will be shown on the second monitor.
xConfiguration Video Monitors: Single
Example:
Video Input Source [1..2] Name
Enter a name for the video input source 1 to 2.
Requires user role: ADMIN
Value space: <S: 0, 50>
Format: String with a maximum of 50 characters.
xConfiguration Video Input Source 1 Name: ""
Example:
Video Input Source 1 Connector
Select which video input connector to be active on video input source 1.
ADMIN
Requires user role:
Value space: <HDMI>
HDMI: Select HDMI when you want to use the HDMI as input source 1.
xConfiguration Video Input Source 1 Connector: HDMI
Example:
Video Input Source 2 Connector
Select which video input connector to be active on video input source 2.
ADMIN
Requires user role:
<DVI>
Value space:
DVI: Select DVI-I when you want to use the DVI-I 2 as input source 2.
xConfiguration Video Input Source 2 Connector: DVI
Example:
D14637.04 Profile C20 and Quick Set C20 Administrator Guide TC4.0, November 2010.
Copyright © 2010 Cisco Systems, Inc. All rights reserved.
Web interface Advanced configuration Advanced configuration
The Video settings, continued...
Video Input Source [1..2] Quality
Video Input Source [1..2] CameraControl Mode
Video Input Source [1..2] CameraControl CameraId
49
Password protection
When encoding and transmitting video there will be a tradeoff between high resolution and high
framerate. For some video sources it is more important to transmit high framerate than high resolution
and vice versa. The Quality setting specifies whether to give priority to high frame rate or to high
resolution for a given source.
ADMIN
Requires user role:
<Motion/Sharpness>
Value space:
Motion: Gives the highest possible framerate. Used when there is a need for higher frame rates,
typically when a large number of participants are present or when there is a lot of motion in the
picture.
Sharpness: Gives the highest possible resolution. Used when you want the highest quality of
detailed images and graphics.
xConfiguration Video Input Source 1 Quality: Motion
Example:
Set the camera control mode for the camera associated with the video source 1 to 2.
ADMIN
Requires user role:
<On/Off>
Value space:
On: Enable camera control.
Off: Disable camera control.
xConfiguration Video Input Source 1 CameraControl Mode: On
Example:
Select the ID of the camera. NOTE: Requires the Video Input Source CameraControl Mode to be
enabled.
ADMIN
Requires user role:
<1>
Value space:
Set the ID of the camera.
xConfiguration Video Input Source 1 CameraControl CameraId: 1
Example:
Administrator guide
Appendices Contact us
www.cisco.com