Cisco C20 Administrator's Manual page 54

Cisco TelePresence System Quick Set C20 / C20 Plus and Profiles using C20
Contents Introduction
Experimental Conference [1..1] PacketLossResilience RateAdaption
NOTE: This Experimental command can be used 'as is' and will not be further documented. The
Experimental settings are likely to change.
Will use the a RateAdaption algorithm adapted to the PacketLossResilience mechanism. Default value is
On.
On: RateAdaption will be used as part of the PacketLossResilience mechanism.
Off: RateAdaption will NOT be used as part of the PacketLossResilience mechanism.
ADMIN
Requires user role:
<On/Off>
Value space:
xConfiguration Experimental Conference 1 PacketLossResilience
Example:
RateAdaption: On
Experimental SoftwareUpgrade Mode
NOTE: This Experimental command can be used 'as is' and will not be further documented. The
Experimental settings are likely to change.
Requires user role: ADMIN
Value space: <Auto/Manual>
Example: xConfiguration Experimental SoftwareUpgrade Mode: Auto
Experimental SoftwareUpgrade ServerAddress
NOTE: This Experimental command can be used 'as is' and will not be further documented. The
Experimental settings are likely to change.
ADMIN
Requires user role:
<S: 0, 255>
Value space:
xConfiguration Experimental SoftwareUpgrade ServerAddress: "http://
Example:
csupdate.tandberg.com/getswlist.py"
D14637.04 Profile C20 and Quick Set C20 Administrator Guide TC4.0, November 2010.
Copyright © 2010 Cisco Systems, Inc. All rights reserved.
Web interface Advanced configuration Advanced configuration
54
Password protection Appendices
Administrator guide
Contact us
www.cisco.com