Cisco TelePresence System 1100 Assembly Manual page 7

Preface
Revised: September 9, 2009, OL-19695-01
Introduction
The Cisco TelePresence System 1100 Assembly Guide outlines the steps and best practices for
assembling and installing the Cisco TelePresence System 1100 (CTS 1100). It also includes first-time
setup procedures, care instructions for the display screen, and procedures to replace field-replaceable
units (FRUs).
This guide is intended primarily for installers of the CTS 1100. Site planners, network administrators,
and facility maintenance personnel may also find this document useful.
This preface provides the following information for using this guide and for accessing other resources.
•
•
•
Conventions
This document uses the following conventions to convey information and alert the user to conditions
requiring special awareness.
This warning symbol means danger. You are in a situation that could cause bodily injury. Before you
Warning
work on any equipment, you must be aware of the hazards involved with electrical circuitry and
familiar with standard practices for preventing accidents.
Caution Means reader be careful. In this situation, you might do something that could result in equipment
damage or loss of data.
Means reader take note. Notes contain helpful suggestions or references to material not covered in the
Note
publication.
OL-19695-01
Conventions
Obtaining Documentation and Submitting a Service Request
Related Documentation
Cisco TelePresence System 1100 Assembly, First-Time Setup, and Field Replaceable Unit Guide
vii