Configuring Zero Channel Settings - Honeywell HRHT4041 Remote User Manual

Figure 3-53 Tour Configuration Interface
Table 3-24 Display Tour Settings
Setting
Enable Tour
Interval
Video Detect/Alarm

Configuring Zero Channel Settings

Click Zero Channel in the Display settings configuration interface to open the Zero Channel
settings configuration interface.
Figure 3-54 Zero Channel Configuration Interface
Description
Check to enable this function.
Adjust the length of the interval, which is how long each
window displays for the current tour. Select from 5s to 120s.
The default is 5s.
Set the Video Detection Tour and Alarm Detection Tour
window modes. Select either View 1 or View 8.
Configuration | 89
800-22740 - A - 02-2017