Honeywell HRHT4041 Remote User Manual page 36

36 | Performance Series HQA Digital Video Recorder Remote User Guide
www.honeywell.com/security
Figure 3-2 Encoding Interface
Table 3-2 Encoding Configurations
Setting
Channel
Video Enable
Code Stream Type
Compression
Smart Codec
Description
Select a channel from the dropdown list
Click to enable the extra video stream. Enabled by default.
Select from Regular, MD (Motion Detection), and Alarm.
You can select different encoding frame rates for different
recorded events.
The DVR system supports active control frame function (ACF),
which allows you to record in different frame rates.
For example, you can use a high frame rate to record
important events, and configure a lower frame rate for
recording scheduled events. ACF allows you to set different
frame rates for motion detection recording and alarm
recording.
Main Stream: Select from H.264H, H.264, or H.264B.
Sub Stream: Select from MJPEG, H.264H, H.264, or H.264B.
Reduces the video bit stream for non-important recorded
video, to maximize storage space.
Select either Stop or Start.