Honeywell HRHT4041 Remote User Manual page 74

Performance series hqa
Hide thumbs Also See for HRHT4041:
Table of Contents

Advertisement

74 | Performance Series HQA Digital Video Recorder Remote User Guide
www.honeywell.com/security
Table 3-15
Configuration
PTZ Activation
Tour
Snapshot
Video Matrix
Voice Prompts
File Name
Show Message
Send Email
Buzzer
Message
Log
Remote Alarm Configurations
Description
When PTZ activation is configured, the system can activate
PTZ operation when an alarm is detected.
1. Click Setup to open the PTZ Activation configuration
interface.
2. Select a preset, tour, or pattern from the drop-down menu.
3. Click Save.
Click to enable a tour to be triggered by an alarm. The system
supports 1/8-window tour. See
on page 88
for tour interval setup. On the Display Settings
tab, when there are two tours enabled by default, you can
configure the system so an alarm triggers the system to
enable the alarm tours you configured here. If there is no
alarm, then the system uses the tour setup that was
configured in the Display interface.
Click to enable the Snapshot function. Channel snapshots
are taken according to the schedule you configure. Alarm
snapshots are taken when an alarm occurs.
Click to enable. When an alarm occurs, the SPOT OUT port video
(a 1-window tour) from the alarm activation channel selected in
the Record Channel.
Select to enable audio broadcast/voice prompts in response to
the event you selected in the drop-down list of event types.
Select a file for the voice prompt.
Click to enable a pop-up message on your local host PC
screen to let you know an alarm has occurred.
The system can send an email when an alarm is detected.
When you have enabled the Snapshot function, the system
can also send an image attached to the email. Go to Main
Menu
Setting
Network
settings. See
Configuring Email on page
Click to enable the Buzzer function. When an alarm occurs,
the buzzer beeps.
Enable to send a message to the device which supported the
3G/4G module when the event triggers.
Click to enable the DVR to record a local alarm log.
Configuring Display Settings
Email to configure the email
53.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents