Cisco 8811 User Manual page 4

Change the Viewing Angle of Your Phone
Procedure
Step 1 Remove the handset from the cradle and pull the plastic tab from the handset rest.
Step 2 Rotate the tab 180 degrees.
Step 3 Hold the tab between two fingers, with the corner notches facing you.
Step 4
Line up the tab with the slot in the cradle and press the tab evenly into the slot. An extension protrudes from
the top of the rotated tab.
Step 5 Return the handset to the handset rest.
Change the Viewing Angle of Your Phone
You can change the angle of the phone to eliminate glare on the screen.
Procedure
Step 1
Hold the receiver in the cradle with one hand.
Step 2 Move the footstand with the other hand to change the angle.
Step 3 (Optional) Adjust the footstand on the key expansion module and ensure that the phone and key expansion
module are stable.
Connect to the Network
Your phone needs to be connected to the telephone network.
• Wired connection—The phone is plugged into the network using an Ethernet cable.
• Wireless connection—The Cisco IP Phone 8861 connects to a Wireless Access Point using Wi-Fi. You
Secure the Phone with a Cable Lock
You can secure your Cisco IP Phone 8800 Series with a laptop cable lock up to 20 mm wide.
Cisco IP Phone 8800 Series Multiplatform Phones User Guide
4
need an SSID, security settings, username, and password to connect to the wireless network.
Your Phone