Specifications; Ec Declaration Of Conformity - Makita DA3010F Instruction Manual

ENGLISH (Original instructions)
1-1. Lamp
1-2. Speed control screw
1-3. Switch lever
1-4. Higher
1-5. Lower
2-1. Reversing switch lever

SPECIFICATIONS

Capacities
No load speed (min
• Due to our continuing programme of research and development, the specifications herein are subject to change without notice.
• Specifications may differ from country to country.
• Weight according to EPTA-Procedure 01/2003
Intended use
The tool is intended for drilling in wood, metal and plastic.
Power supply
The tool should be connected only to a power supply of
the same voltage as indicated on the nameplate, and can
only be operated on single-phase AC supply. They are
double-insulated in accordance with European Standard
and can, therefore, also be used from sockets without
earth wire.
Noise
The typical A-weighted noise level determined according
to EN60745:
Sound pressure level (L
Sound power level (L
Uncertainty (K) : 3 dB(A)
Wear ear protection
Vibration
The vibration total value (tri-axial vector sum) determined
according to EN60745:
Work mode: drilling into metal
Vibration emission (a
Uncertainty (K) : 1.5 m/s
For European countries only

EC Declaration of Conformity

We Makita Corporation
manufacturer declare that the following Makita
machine(s):
Designation of Machine:
Angle Drill
Explanation of general view
3-1. Lamp
3-2. Speed control screw
3-3. Switch lever
3-4. Higher
3-5. Lower
5-1. Chuck key
Model
Steel
Wood
-1
)
Overall length
Net weight
Safety class
) : 81 dB(A)
pA
) : 92 dB(A)
WA
2
) : 2.5 m/s or less
h,D
2
as the responsible
DA3010
10 mm
25 mm
0 -2,400
270 mm
1.6 kg
ENE032-1
Model No./ Type: DA3010,DA3010F,DA3011,DA3011F
are of series production and
Conforms to the following European Directives:
ENF002-1
98/37/EC until 28th December 2009 and then with
2006/42/EC from 29th December 2009
And are manufactured in accordance with the following
standards or standardised documents:
EN60745
The technical documentation is kept by our authorised
representative in Europe who is:
Makita International Europe Ltd,
ENG102-3
Michigan, Drive, Tongwell,
Milton Keynes, MK15 8JD, England
000230
ENG202-3
ENH101-13
General Power Tool Safety
Warnings
WARNING Read all safety warnings and all
instructions. Failure to follow the warnings and
instructions may result in electric shock, fire and/or
serious injury.
3
6-1. Sleeve
6-2. Ring
7-1. Gripping part
7-2. Side grip (handle)
DA3010F DA3011
10 mm 10 mm
25 mm 25 mm
0 -2,400 0 -2,400
270 mm 270 mm
1.6 kg 1.6 kg
/II
30th January 2009
Tomoyasu Kato
Director
Makita Corporation
3-11-8, Sumiyoshi-cho,
Anjo, Aichi, JAPAN
DA3011F
10 mm
25 mm
0 -2,400
270 mm
1.6 kg
GEA010-1