Phone App Settings; Fixed Dialing Numbers (Fdn); Quick Responses; Voicemail - Honeywell dolphin 70e black User Manual

Phone App Settings

Open the Phone app , press the Menu button , and select Settings to setup and manage
advanced phone options.

Fixed Dialing Numbers (FDN)

When FDN is enabled, outgoing calls are restricted to fixed dialing numbers saved on the active SIM
card installed in the terminal. Select Fixed Dialing Numbers from the Settings menu to enable/disable
the feature, change the FDN access PIN (PIN2), or modify the phone numbers on the FDN list saved on
the active SIM card.

Quick responses

To modify a Quick response, select it from the list, make your changes, and then touch OK.
The Quick Response list appears when you select message during an incoming call. You can then
send the caller a Quick response from the list without answering the call (i.e., "I'll call you back").

Voicemail

Select a voicemail service and set the phone number used to access and manage your voicemail. If your
carrier requires a password after the phone number, insert a comma (,) between the phone number and
password to add a pause.

Audio Settings

Enable/Disable Noise suppression (cancellation) and adjust the Modem Volume. The Modem Volume
adjusts the receiver volume level for phone calls.

Other Call Settings

Under the Other Call Settings heading, set the Dual-tone multi-frequency (DTMF) Tone length and Call
Forwarding options. To view and modify carrier specific options stored on the SIM card (e.g., Caller ID or
Call Waiting), select Additional settings.

Internet Call Settings

Configure and manage Session Initiation Protocol (SIP) calls on Internet Protocol (IP) networks.
Note: An active Wi-Fi connection is required for SIP calls.
Add an Account
1. Open the Phone app , press the Menu button , and select Settings.
2. Touch Accounts under the Internet call settings heading.
3. Touch ADD ACCOUNT.
4. Enter the appropriate configuration settings according to your Internet calling service provider.
8 - 6