Installing the Battery in Terminals without a Battery Door Lock
The terminal is shipped with the battery packaged separate from the unit. Perform the steps illustrated
below to install the battery.
Note: If your Dolphin 70e Black model does not have a battery retention strap, refer to the battery installation
instructions on page 2-2.
Ensure all components are dry prior to placing the battery in the terminal. Mating wet components may cause
damage not covered by the warranty.
2
Important - All battery and connector doors must be present, undamaged, and properly closed to
maintain the environmental rating of the terminal.
For information on how to remove the battery, see
Note: Standard battery and standard battery door shown.
1
3
Battery
Retention
Strap
6
8
Replacing the Battery
5
4
7
Apply pressure to the edges
9
of the battery door to ensure
the door is properly closed.
on page
2-15.
2 - 3