Honeywell dolphin 70e black User Manual page 109

The file image and saved location are displayed on the receiving terminal screen when the transfer
is successful. By default, the file is saved to the root Honeywell/nfcbtdemo folder of the microSD
card.
9. Select the Back button
Note: The NFC Bluetooth demo automatically disables Bluetooth technology when the demo is closed.
NFC Beam Demo
NFC Beam Demo demonstrates how a file can be transmitted between two devices using the Android
beam.
Note: The NFC Bluetooth Demo is for use with Dolphin 70e Black terminals only.
1. Verify NFC technology is enabled on both terminals.
2. Verify Android beam is enabled on the terminal sending the file.
3. Touch NFC Beam Demo
4. Check the box next to the test.txt file.
5. Hold the terminals back to back. The sending terminal emits a sound, the demo screen image
shrinks, and the message, "Touch to beam" displays.
Note: Both terminals must be unlocked for NFC detection. If sound is muted, the terminal vibrates when an
NFC tag is detected.
6. Touch the reduced screen image to initiate file transfer.
A "File received" message is displayed on the receiving terminal when the transfer is successful. By
default, the file is saved to the root Honeywell/nfcbeamdemo folder of the microSD card.
7. Select the Back button
to exit the demo.
from inside the NFC Demos
to exit the demo.
app on the sending terminal.
9 - 7