Hitachi COMPUTE BLADE 500 SERIES Management Module Setup Manual page 297

Operation
ID
category
3834
3836
3838
383A
383C
383E
3840
3842
3844
3845
384B
384C
3850
3853
385A
3861
3862
Hitachi Compute Blade 500 Series Management Module Setup Guide
Recording trigger
Backing up a pair of
SSH host key.
Restoring a pair of SSH
host key.
Creating SSL private
key and signature
certificate.
Creating CSR.
Importing certificate.
Copying certificate.
Backing up certificate.
Restoring certificate.
Backing up
management module
settings.
Restoring management
module settings.
Changing LDAP
settings.
Changing LDAP
settings.
Changing power saving
settings.
Changing power saving
settings.
Changing date and time
settings
Changing N+M cold
standby settings for
server blade.
Changing server blade
settings.
Functional detail
Message
SSH host key pair is backed up.
Channel:xxx File:xxx
SSH host key pair is restored.
Channel:xxx File:xxx
SSL private key and self signed
certificate are created. Channel:xxx
SSL private key and certificated
signing request (CSR) are created.
Channel:xxx
Certificate is imported. Channel:xxx
File:xxx Certificate file type:xxx
Certificate is copied. Channel:xxx
File:xxx Certificate file type:xxx
Certificate is backed up.
Channel:xxx File:xxx
Certificate is restored. Channel:xxx
File:xxx
Management module setting is
backed up. Channel:xxx File:xxx
Management module setting is
restored. Channel:xxx File:xxx
LDAP setting is changed.
Channel:xxx Category:xxx
Detail:xxx Value:xxx
LDAP setting is changed.
Channel:xxx Category:xxx
Detail:xxx
Power saving setting is changed.
Channel:xxx Category:xxx
Detail:xxx Value:xxx
On Server blade N, Power saving
setting is changed. Channel:xxx
Category:xxx Detail:xxx Value:xxx
On Management module, date and
time is changed. Channel:xxx
Category:xxx Detail:xxx Value:xxx
On Server blade N, N+M cold
standby partition information
setting is changed. Channel:xxx
On Server blade N, setting is
changed. Channel:xxx Category:xxx
Detail:xxx Value:xxx
2-273