Disabling And Undoing Lldp; Enabling Lldp On Management Ports; Disabling And Undoing Lldp On Management Ports - Dell C9000 Series Networking Configuration Manual

Disabling and Undoing LLDP

To disable or undo LLDP, use the following command.
• Disable LLDP globally or for an interface.
disable
To undo an LLDP configuration, precede the relevant command with the keyword no.

Enabling LLDP on Management Ports

LLDP on management ports is enabled by default.
To enable LLDP on management ports, use the following command.
1 Enter Protocol LLDP mode.
CONFIGURATION mode
protocol lldp
2 Enable LLDP.
PROTOCOL LLDP mode
no disable
Disabling and Undoing LLDP on Management
Ports
To disable or undo LLDP on management ports, use the following command.
1 Enter Protocol LLDP mode.
CONFIGURATION mode.
protocol lldp
2 Enter LLDP management-interface mode.
LLDP-MANAGEMENT-INTERFACE mode.
management-interface
3 Enter the disable command.
LLDP-MANAGEMENT-INTERFACE mode.
To undo an LLDP management port configuration, precede the relevant command with the keyword no.
Link Layer Discovery Protocol (LLDP) 665