Notes On Printing - Toshiba E-STUDIO2000AC Printing Manual

4.OTHER PRINTING METHODS
 Notes on printing
 USB Direct Printing requires the USB Direct Print setting to be enabled on TopAccess. For details, refer to the
TopAccess Guide.
 You cannot specify which page(s) of the selected file to print. All pages are to be printed.
 USB Direct Printing supports the printing of PDF files whose versions are from 1.3 to 1.7.
 With this feature, the equipment can print encrypted PDF files whose encryption level is either "40-bit RC4" or
"128-bit RC4."
 The feature does not support encrypted PDF files whose encryption level is [128bit AES], and some files of other
encryption levels may not be printable as well. In these cases, print these files from a client computer.
 PDF files are printed with the sizes defined in the Page Size in each one. If the size defined in the PDF file is not
supported in the equipment, it is printed as a custom paper size. (If the defined size is outside the supported range,
the width and the height are automatically converted into one within the range.) When you want to print PDF files
with paper placed in a drawer, select it on the touch panel. If the paper size placed in the drawer is smaller than the
one defined in the PDF file, a part of images may not be printed.
 For printing the PRN files, the page description languages supported by USB Direct Printing are PostScript 3, PCL5e,
PCL5c, PCL6 and XPS.
 Do not turn on the equipment when a USB storage device is connected to the port.
 The USB storage device should meet the following requirements:
- FAT16 and FAT32 formats
- Single-partition (USB media with multiple partitions are not supported.)
However, some of the devices may not be used in this equipment, even though these requirements have been met.
USB Direct Printing 167