Makita JR3050T Technical Information page 12

W
iring diagram
[3] Wiring in Handle
Note: Choke coils are not used except for the following countries:
Taiwan, low voltage of Great Britain
When choke coils are used,
put the vinyl tube on choke coils,
and fix it with two ribs as illustrated
to right.
Fix lead wires with
lead wire holder.
Choke coil
Put noise suppressor
in this space.
Put insulated connector here.
Put insulated connector here.
rib
Fix lead wires with
lead wire holder.
rib
P 12/ 12
Route the lead wires
of choke coils
between ribs.
1) Route the lead wires from
choke coil to brush holder
through the opening.
2) Fix lead wires with the
lead wire holder.
Be sure that lead wires are
tight between the opening
and the lead wire holder.
Vinyl tube