Wiring Diagram; Rear Side - Makita JR3050T Technical Information

W
iring diagram
[2] Wiring in Motor Housing (cont.)

[2] -2. Rear side

Note: Choke coils are not used except for the following countries:
Taiwan, low voltage of Great Britain
Fig. 27
Lead wire from choke coil
to brush holder (purple)
Field lead wires
(black)
Field lead wire
(orange)
Lead wire from
choke coil to
brush holder
(orange)
Field lead wire (purple)
Route the following lead wires
through this opening:
*Field lead wire (orange)
*Lead wire from choke coil
to brush holder (orange)
*Two field lead wires (black)
Lead wire holder
Opening for lead wires
1) Route the following lead
wires through the opening:
*Field lead wire (purple)
*Lead wire from choke coil
to brush holder (purple)
2) Fix the two lead wires with
the lead wire holder.
Be sure that the lead wires
are tight between the opening
and the lead wire holder.
Lead wire (clear)
interconnecting between
noise suppressor and
field core
P 11/ 12