Makita JR3050T Technical Information page 10

W
iring diagram
[1] Protecting the Interconnecting Lead Wire with Heat-Shrink Tube
In case that noise suppressor is used, protect the lead wire that interconnects between noise suppressor and field core
using polyolefin heat-shrink tube. Be sure to cover the crimped portion as illustrated in Fig. 25.
Fig. 25
[Before shrinkage]
crimped portion
Non-insulated Lead wire (clear) that interconnects
terminal between noise suppressor and
field core
[2] Wiring in Motor Housing
[2] -1. Front Side;
Fig. 26
Secure the non-insulated terminal
of the interconnecting lead wire
with the screw that fastens field
to motor housing.
Polyolefin heat-shrink tube
Polyolefin heat-shrink tube
(before shrinkage)
Routing the Lead Wire Interconnecting Between Noise Suppressor and Field Core
Lead wire (clear) interconnecting
between noise suppressor and
field core
[After shrinkage]
Polyolefin heat-shrink tube
(after shrinkage)
(View from baffle plate side)
Route the lead wire
through this opening.
P 10/ 12