Attaching Brackets To The Sce 2000 - Cisco 2000 4xGBE Quick Start Manual

Attaching Brackets to the SCE 2000

Before installing the SCE 2000 in the rack, you must first install an appropriate rack-mount bracket on each side of the front
of the SCE 2000, as illustrated in the following figures.
Figure 4 Attaching the Mounting Brackets (4-post)
PW R A
PW R B
STA TUS
BYP ASS
MN G 1
MN G 2
CO NSO LE
LINK / AU X LINK RX
10/1 00/ TX
ACT IVE
1000 LINK / 10/1 00/
ACT IVE
1000
RX
MM
TX
GBE -1
SUB
LINE
Figure 5 Attaching the Mounting Brackets (2-post)
PW R A
PW R B
STA TUS
BYP ASS
MN G 1
MN G 2
CO NSO LE
LINK / AU X LINK RX
10/1 00/ TX
ACT IVE
1000 LINK /
10/1 00/
ACT IVE
1000
RX
MM
TX
GBE -1
SUB
LINE
Before installing the SCE 2000 in the rack, you must first install a rack-mount bracket on each side of the front of the SCE 2000.
To install the rack-mount brackets on the SCE 2000 chassis, complete the following steps:
Align the rack-mount bracket to the side of the SCE 2000. Choose the proper bracket for your installation (2-post rack
Step 1
or 4-post rack) as illustrated in
Step 2 Insert and tighten three screws.
Step 3 Repeat steps 1 and 2 on the other side of the SCE 2000.
If mounting the SCE 2000 in a rack with only two posts, skip to
If mounting the SCE 2000 in a rack with four posts, proceed to the next step,
only), page 7.
6
C is co SC
E 20 00
Se rie s
4x G BE
LINK RX
TX
LINK RX
TX
LINK RX
TX
RX
MM
TX
RX
MM
TX
RX
MM
TX
NET
GBE -2
SUB LINE
/CA SCA DE
NET
C is co SC
E 20 00
Se rie s
4x G BE
LINK RX
TX
LINK RX
TX
LINK RX
TX
RX
MM
TX
RX
MM
TX
RX MM
TX
NET
GBE -2
SUB LINE
/CA SCA DE
NET
SCE 2000 Mounting Brackets
1 2
1 2
Mounting the System to the Rack, page
Installing the Crossrail Supports (Four-post rack
8.