Canon imagePROGRAF PRO-2000 Online Manual page 758

3. Turn on printer.
If you cannot resolve problem, follow procedure below to reinstall printer driver.
Check3
• For Windows:
1. Click Cancel.
◦ If the Installation Failure screen appears:
1. Click Start Over.
2. Click Exit on Start Setup screen and finish setup.
◦ If the Connection failed. screen appears:
1. Click Next.
2. Click Next on displayed screen.
3. Click Back to Top on Select Printer screen.
4. Click Exit on Start Setup screen and finish setup.
2. Turn off printer.
3. Restart computer.
4. Make sure you have no application software running.
5. Redo setup according to instructions on Canon website.
Note
• You can use the Setup CD-ROM to redo setup.
• For Mac OS:
1. Click Next.
2. Click Exit on displayed screen and finish setup.
3. Turn off printer.
4. Restart computer.
5. Make sure you have no application software running.
6. Redo setup according to instructions on Canon website.
758