Canon imagePROGRAF PRO-2000 Online Manual page 540

Click the Clear Coating tab, select the Clear Coating Area item that matches your purpose (see below
for the selections), and then click OK.
Auto
The printer automatically sets the areas to be clear-coated and whether clear coating is to be
executed.
It may be possible to reduce the ink consumption of the chroma optimizer (CO) or to accelerate the
print speed.
Overall
The printer clear-coats the entire print area.
If selecting Auto produced unsatisfactory clear coating effects, selecting Overall may improve the
results.
Important
• Depending on the type of paper selected from Media Type on the Main tab, you may not be able
to select Overall tab.
For paper for which Overall can be used, select the paper you want to use from "Paper
Information List" and check the information.
• If Overall is selected and the media type is changed to one that cannot use Overall, the clear
coating area setting is changed to Auto.
5. Complete the setup
Click OK on the Main tab.
When printing is executed, the clear coating effect that was set is added when the document is printed.
540