Canon imagePROGRAF PRO-2000 Online Manual page 242

Protocol Setting
Printer Name
Use LPR
Printer Location
Use Wired Power Save
Use Wireless Power Save
Use RAW
Use LLMNR
Use Spanning Tree
WSD Setting
Use WSD
WSD Timeout
Use WSD Push Scan
Use WSD Rx Optimization
SNMP Setting
Use SNMPv1
Use SNMPv3
SNMP Community Name1
SNMP Community Name2
SNMP Extra Access Authority
SNMP Access Authority1
SNMP Access Authority2
SNMPV3 Setting
User1
User Name
Use SNMPv3
MIB Access Restriction
Security Setting
Protocol setting information
Printer name
Use LPR
Printer location
Discontinuous reception (Wired LAN)
Discontinuous reception (Wireless
LAN)
Use RAW
Use LLMNR
Use spanning tree
WSD setting information
Use WSD
Timeout
Use WSD push scan
Use WSD reception optimization
SNMP setting information
Use SNMPv1
Use SNMPv3
SNMP community name 1
SNMP community name 2
SNMP extra access authority
SNMP access authority 1
SNMP access authority 2
SNMPV3 setting information
User 1
User name
Use SNMPv3
MIB access restriction
Security setting
242
-
XXXXXXXX (up to 16 characters)
On/Off
XXXXXXXX (up to 16 characters)
On/Off
On/Off
On/Off
On/Off
On/Off
-
On/Off
1/5/10/15/20 [min]
On/Off
On/Off
-
On/Off
On/Off
XXXXXXXX (up to 32 characters)
XXXXXXXX (up to 32 characters)
Read Only/Read Write
Read Only/Read Write
Read Only/Read Write
-
-
XXXXXXXX (up to 32 characters)
On/Off
Read Only/Read Write
No Auth No Encrypt/Auth No En-
crypt/Auto Encrypt