Canon imagePROGRAF PRO-2000 Online Manual page 393

5. If paper dust has accumulated in vacuum holes (A) on platen or in borderless printing ink
grooves (B), use cleaning brush (C), provided with printer, to wipe it away.
Important
• Never touch the linear scale (A), carriage shaft (B), or ink tube stabilizer (C). Touching may
damage them.
Note
• If the cleaning brush is dirty, rinse it in water.
6. Using a damp cloth that you have wrung out completely, wipe inside the top cover to clean
it. Wipe away any ink residue and paper dust (debris from cutting) on top cover roller (A),
paper retainer (B), entire platen (C), borderless printing ink grooves (D), periphery of left
and right ink suction holes (E, F), and output guide (G), and so on.
393